 |
| Automation |
|
 FPCB auto mounting Machine - ARRAY TYPE
|
|
| 1) Stage/ using process |
| Used for FPCB inputing stage on SMT line |
| 2) Purpose |
| FPCB Auto insert machine is used to automatically put FPCB to carrier to start |
| 3) Specification |
| Category |
Spec |
| FPCB type |
KIT & BLOCK Type |
| Carrier size Min ÷ Max (mm) |
50*50 ÷ 300*250 |
| Voltage Source |
220V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
1000*500*1200 |
| Function: F-PCB Auto-rolling |
|
| 4) Design characteristics |
| Using Mortor/Drive screw and Pressed vaccum system to automatically suck and move carrier/F-PCB
|
 |
|
 |
|
| FPCB Semi auto mounting Machine - BLOCK FPCB
|
|
| 1) Stage/ using process |
| Used for FPCB inputing stage on SMT line |
| 2) Purpose |
| Used to automatically put FPCB to carrier to start |
| 3) Spec |
| Category |
Spec |
| FPCB type |
BLOCK Type |
| Carrier size Min ÷ Max (mm) |
50*50 ÷ 300*250 |
| Voltage Source |
220V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
450*700*450 |
|
| 4) Design characteristics |
| Using cylinder and spring compression system to automatically mount FPCB on Carrier
|
 |
|
|
|
| AOI Auto marking Machine
|
|
| 1) Stage/ using process |
| Automated Optical-Inspection Stage |
| 2) Purpose |
| Automatically marking on defected point |
| 3) Specification |
| Category |
Spec |
| FPCB type |
KIT & BLOCK Type |
| Carrier size Min ÷ Max (mm) |
50*50 ÷ 300*250 |
| Voltage Source |
220V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
800*800*850 |
|
| 4) Design characteristics |
| Automatically receive data from AOI machine, use motor servo/drive screw ball to move and mark defected point exactly
|
 |
|
|
|
| Bracket Auto mounting Machine
|
|
| 1) Stage/ using process |
| Used for Bracket mounting stage |
| 2) Purpose |
| Automatically mount bracket into F-PCB |
| 3) Specification |
| Category |
Spec |
| FPCB type |
Array FPCB |
| Carrier size Min ÷ Max (mm) |
50*50 ÷ 300*250 |
| Voltage Source |
380V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
1500*1500*1500 |
|
| 4) Design characteristics |
| Using Auto Vibration BOWL to input bracket to Mounting machine |
 |
|
|
|
| Rubber mounting JIG
|
|
| 1) Stage/ using process |
| Used in Rubber mounting stage |
| 2) Purpose |
| Mounting rubber part to F-PCB Array |
| 3) Specification |
| Category |
Spec |
| FPCB type |
Array |
| Rubber part |
Array |
| Total size L * W * H (mm) |
600*450 |
|
| 4) Design characteristics |
| Flexible structure design can change Rubber component layout to suit FPCB array design |
 |
|
|
|
| Fuction Inspection Machine for Array Model Side Key
|
|
| 1) Stage/ using process |
| Function Inspection stage |
| 2) Purpose |
| Check out the OPEN or SHORT defect and volume key/power key function defect
|
| 3) Specification |
| Category |
Spec |
| FPCB type |
KIT FPCB |
| Carrier size Min ÷ Max (mm) |
165*80 ÷ 265*120 |
| Voltage Source |
220V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
1500*600*1500 |
| Function: Auto-marking 'PASS' on standard product |
|
| 4) Design characteristics |
| Used for Array type. Automatically check out defect and mark ‘PASS’ on standard product
|
 |
|
|
|
| Fuction Inspection Machine for CTC
|
|
| 1) Stage/ using process |
| Function Inspection stage |
| 2) Purpose |
| Check out the OPEN or SHORT defect on circuit of CTC type |
| 3) Specification |
| Category |
Spec |
| FPCB type |
BLOCK FPCB |
| Carrier size Min ÷ Max (mm) |
50*50 ÷ 300*250 |
| Voltage Source |
220V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
2000*600*1500 |
| Function: Auto-marking 'PASS' on standard product
T? đ?ng ph?n t?ch ri?ng bi?t s?n ph?m OK/ NG
|
|
| 4) Design characteristics |
| Used for Array type. Automatically check out defect and marking PASS on standard product. Automatically separate standard/no good product
|
 |
|
|
|
| Dual-Typed Function Inspection Machine
|
|
| 1) Stage/ using process |
| Function Inspection stage |
| 2) Purpose |
| Check out the OPEN or SHORT defect on circuit |
| 3) Specification |
| Category |
Spec |
| FPCB type |
BLOCK FPCB |
| Voltage Source |
220V AC, 50/60Hz |
| Gas source (Mpa) |
0.4 ÷ 0.6 |
| Total size L * W * H (mm) |
330*300*400 |
|
| 4) Design characteristics |
| Design Dual-typed Inspection Machine to automatically check out defect and mark ‘PASS’ on standard product.
|
 |
|
|
|
|
Business 
